Showing reviews 1-10 of 35 | Next

1. Inprove

   Posted by Jose A Gutiuerrez on 12th May 2016

   This item is much better than the original is more flexible. take i lot of hard landing, that will be a crash with the original.

   ---

2. Great skid!

   Posted by Dustin on 29th Feb 2016

   This is a nice looking, functional, and durable skid. One thing I would recommend is to install a washer between the bolt and skid to help spread out the bolting pressure when you install these. My first set cracked at the bolt in a crash, so I think the bolt puts outward pressure on the hole when it's tightened down and makes it more likely that it will split apart in a crash.

   ---

3. Skid

   Posted by Unknown on 10th Feb 2016

   Good product

   ---

4. Awesome Performance

   Posted by Colby on 4th Oct 2015

   A friend of mine brought over his mini Simpletcopter to try. I wouldn't let him leave until I ordered mine so it would be just like his. I thought my qav250 was fast and maneuverable, but this thing takes it to another level. Without a battery my build came in at 366 grams. Flying with his 6x4 props on 3s is plenty of power for now. Buy and build just like he tells you and you will not be disappointed. https://www.youtube.com/watch?v=dWJjTcZYpoY

   ---

5. Just works

   Posted by Brandon Harmon on 23rd Mar 2015

   Flexible and strong, Still haven't broken one. They are easy to paint also. I like to remove the 4 tabs on top so it sits flush with the frame.

   ---

6. TOUGH TOUGH TOUGH!

   Posted by Corbin on 26th Feb 2015

   I bought this landing skid for my flite test knuckle h quad because those stupid delrin pieces keep on breaking and they are realy expensive. So wondering around on youtube I found hallstudios and sawone of his tricopter vids and noticed the cool landing skid on it. I said to my self that is it expensive and durable? So I went onto his wedsite and bought one. found it in the mail and it is PERFECT! it fits like a glove and is very tough. im definitly buying more things from simple copter.com.

   ---

7. skid for simple tri copter

   Posted by John Black on 13th Nov 2014

   fit perfect and came with hardware to mount to copter.

   ---

8. Skids

   Posted by Jason on 8th Jul 2014

   Simple and functional. Goes great with the Tcopter.

   ---

9. Crucial

   Posted by Jason Pratt on 2nd Mar 2014

   I have put this skid through a lot, it cushions great, is slightly springy, and doesn't brake. No kidding I've slammed it into the pavement about 100 times, no problem.
   
   Would be great if the frames came pre-drilled with holes for this guy.

   ---

10. Great for protecting Battery

    Posted by DMain on 6th Feb 2014

    I attached my skid with 2 small wood screws so it can rip free easily if (WHEN) a crash happens. I put velcro hook on the bottom of the copter on each side of the front skid mount, and put the front wood screw through a Turnigy velcro strap to increase the holding safety. Depending on the battery, it can run lengthwise or side-to-side resting on the skid for a little more support.

    ---

Showing reviews 1-10 of 35 | Next

• 
  Simple TCopter v2.0 "new"
  $34.95
  Add To Cart
• 
  Simple Tricopter 3.0 Frame comes with landing gear and battery strap
  $34.99
  Add To Cart
• 
  Servo to Rear Yaw Block connector
  $5.00
  Add To Cart
• 
  Simplecopter V Tail ( the Tilt)
  $44.95
  Add To Cart