These are the new esc's for the Sunnysky 2205 motors and the 2212. they work fine with the kk2 and naze32 board. with the built in bec they will power the servo on the tri and T copter. These weigh much less than the big old 30's we were using. save 2 or more oz with these.

Flashed with newest BlHeli firmware installed and tested!

The Mini 20A features a UBEC and is the smallest 20A ESC With a BEC built in for the builds when one do not have to worry about another 5v power suppy to power there flight controller.

Dampened Light supported - OneShot125  autodeacte Compatible

Specifications

• BlHeli: Dampend light supported and OneShot125 compatible

• Max continuous load: 20 amps

• Burst Current:  30A/30sec

• BEC: 5v/1amp max

• Lipo Cells: 2 to 4 cells

• Processor: Atmel

• Refresh Rate: 600hz 

• Default timing: Medium ((Recommended for 2204) (Med-High Recommened for 2206))

• Servo Cable Flashable - via Afro Stick, MT1501, Or Beast-Mode Flasher (Arduino Nano)

• 27mm L x 14mm W x 5mm H

• 10g with wires